玩蛇网提供最新Python编程技术信息以及Python资源下载!

VMware克隆CentOS后网卡不能启动的解决方法

玩蛇网推荐图文教程:python 列表

VMware克隆CentOS后网卡不能启动的解决方法,在这里VMware 克隆后无法启动网卡的解决方法心得笔记。

首先要保证udev-post 启动,如下:

[root@localhost ~]# chkconfig --list|grep udev
udev-post 0:off 1:on 2:on 3:on 4:on 5:on 6:off

[root@localhost ~]# /etc/init.d/udev-post start
Retrigger failed udev events [ OK ]
[root@localhost ~]#

将原有的eth0的那一行注释掉,然后将生成的eth1改为eth0

[root@localhost ~]# cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.

# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x8086:0x100f (e1000)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8c:61:3e", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:3c:e6:09", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
[root@localhost ~]#

VMware克隆CentOS后网卡不能启动的解决方法,最后修改网卡的配置文件,修改如下:
[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
UUID=fb802c67-087a-4f50-812b-f3d20053aa4b
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none

HWADDR=00:0C:29:3C:E6:09
IPADDR=192.168.100.212

PREFIX=24
GATEWAY=192.168.100.1
DNS1=192.168.100.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
[root@localhost ~]#

VMware克隆CentOS后网卡不能启动的解决方法
最后重新启动系统,CentOS虚拟机克隆后网卡配置问题。

玩蛇网文章,转载请注明出处和文章网址:https://www.iplaypy.com/linux/l7037.html

相关文章 Recommend

玩蛇网Python互助QQ群,欢迎加入-->: 106381465 玩蛇网Python新手群
出炉日期:2017-01-14 20:00 玩蛇网 www.iplaypy.com

您现在的位置: 玩蛇网首页 > linux入门教程 > 正文内容
我要分享到:

必知PYTHON教程 Must Know PYTHON Tutorials

必知PYTHON模块 Must Know PYTHON Modules